Hose Crimping Machine

The hose crimping machine is a tool that you often need to use when processing hoses. But do you know the working principle and working process of the pipe locker? The following is a professional lock tube manufacturer to introduce to you.
The working principle of the hose crimping machine: the oil pump drives the hydraulic oil under the drive of the motor to push the plunger in the buckle cylinder forward, so that the two inner taper sleeves on the plunger and the front cylinder head push the die seat with the symmetrical cone surface. Radial contraction to achieve the module's crimping of the hose. When the contraction amount reaches the scale setting value, the buckle pressure automatically stops. After the electromagnetic reversing valve is reversed, the hydraulic oil enters the two mold-opening cylinders, pushing the pressing plunger to reverse movement, and the mold base drives the module to recover under the action of the spring.

 
    The working process of the hose crimping machine: the buckle mechanism is the working mechanism of the lock pipe machine. The pressure sleeve is reciprocated by the cylinder piston, and the spring pressure head fixed to the front plate is continuously pressed and relaxed. Put the assembled joint into the appropriate position in the middle hole of the spring indenter, start the motor to drive the oil pump to supply oil, and control the electromagnetic reversing valve to reverse the direction, drive the cylinder piston to move forward, and pass the pressure sleeve with the inner cone hole. The spring indenter with the same taper is pressed to achieve the pressing purpose. Press the mold opening button, the piston drives the pressure sleeve to move in the opposite direction, and the spring p
pressure head is restored. At this time, the hose joint can be taken out from the lock machine.

Message


Home
Whatsup
Message
Contact