• 17

    2019-07

    How to use the hose crimping machine?

    Hose crimping machine is a common tool in rubber pipe installation engineering. However, many people do not understand the precautions for the use of hose crimping machine. As a professional crimping machine manufacturer, we will introduce...

  • 08

    2019-07

    How to extend the life of the crimping machine

    The hydraulic hose crimping machine is a frequently used tool in the production of hydraulic pipes. However, it is not uncommon to shorten the life or even cause an accident due to improper use. As a professional manufacturer of lock pipe m...

  • 02

    2019-07

    Introduction of the hose skiving machine

    Peeling machine, also known as skiving machine , its main function is to peel off the outer plastic of the hose when using the crimping machine to process the high-pressure hose assembly. We all know that the high-pressure hose is composed...

  • 26

    2019-06

    Introduction of the hose crimping machine open sequence

    Before running the hose crimping machine , be sure to clear the pump sequence first, so that no leaks are safe. The use of hose lock pipe machine is good or bad. To understand the product correctly, we can guarantee that the machine will se...

  • 17

    2019-06

    How to use the crimping machine

    Buckle machine installation and commissioning: The hose crimping machine is suitable for handling by forklift and is forced by the bottom of the tube press. The tube press is strictly prohibited from being inverted. It is strictly forbidden...

  • 12

    2019-06

    The difference between manual and automatic crimping machine

    The crimping machine has an oil pump driven by the motor, and outputs hydraulic oil. The piston in the clamping cylinder is pushed forward, so that the two sliding surfaces on the piston and the front end cover are symmetrically and radiall...

  • 06

    2019-06

    Pipe cutting machine use precautions

    1. Pipe cutting machine is suitable for cutting various materials, especially for hydraulic pipe cutting; 2, cutting fast, no burr and the cutting opening is perpendicular to the axis of the pipe; 3. The clamping jaws made of stainless stee...

  • 28

    2019-05

    Precautions for use of crimping machine

    In the process of using the crimping machine , the process must be strictly followed to avoid accidents. The following is a brief introduction to the precautions when using crimping machine . 1. The operator must operate according to the pr...


Home
Whatsup
Message
Contact